Powered by Orange Coast Pneumatics

New products

Product Information »  New Products Category

New Products

Electric Actuators

Battery-less Absolute Encoder Type Electric Actuator/High Performance Slider Type, High Rigidity Guide　LEKFS□G Series

Updated Sep-22

  • Reduces cycle time
    Cycle time: Reduced by 39% (0.57 s ← 0.93 s) compared with the existing model∗
    ∗ When LEKFS25GH-400 is operated from 0 to 400 mm (stroke)
    Acceleration/Deceleration: 10000 mm/s2(334% increase compared with the existing model)
    Max. speed: 1500 mm/s (Improved by 25% compared with the existing model)
  • Circular arc grooves allow for high rigidity and high precision.
  • Moment resistance: Improved by up to 61%
  • Battery-less absolute encoder compatible
    Easy operation restart after recovery of the power supply
    Maintenance labor can be reduced as the product does not require the use of batteries.

High Performance Electric Actuators　LEFS□F/LEY□F Series

Updated Sep-22

  • A rod type (LEY□F) has been added. [New]
  • LEFS□F: Reduced by 39% (0.57 s ← 0.93 s) compared with the existing model∗1
    LEY□F: Reduced by 44% (0.54 s ← 0.97 s) compared with the existing model∗2
    　∗1 When LEFS25FH-400 is operated from 0 to 400 mm (stroke)
    　∗2 When LEY25FA-300 is operated from 0 to 300 mm (stroke)
  • Acceleration/Deceleration: 10000 mm/s2
    (334% increase compared with the existing model)
  • Max. speed
    LEFS□F: 1500 mm/s (Improved by 25% compared with the existing model)
    LEY□F: 800 mm/s (Improved by 60% compared with the existing model)

e-Actuator Easy to Operate Integrated Controller　Slider Type/Rod Type　EQFS□H/EQY□H Series

Updated Jan-23

  • Easy to set up, just like air equipment!
    Two position stop with no programming required
    Three position stop with no programming required
    Cycle time can be set in all control modes.
  • Downsized with Integrated Controller, Wiring saving, Labor saving
    · Programless · Reduced adjustment time
  • Annual CO2emissions reduced by up to 59% through motor control optimization 5.8 ← 14.1 [5.8 kg-CO2e/year (14.1)]
    ∗ The numerical values vary depending on the operating conditions.

Electric Actuator/Slider Type High Rigidity Guide LEKFS Series

Updated Nov-22

  • An AC servo motor type has been added. [New]
  • Size 16 has been added to the battery-less absolute type. [New]
  • Circular arc grooves allow for high rigidity and high precision.
  • Moment resistance improved by up to 61%
  • Table displacement reduced by up to 50%
  • With internal battery-less absolute encoder
    Restart from the last stop position is possible after recovery of the power supply.
    Reduced maintenance (No need to manage or replace batteries)
  • Positioning repeatability: ±0.01 mm

Electric Actuator/High Performance Rod Type　LEY□G Series

Updated Sep-22

  • Reduces cycle time
    Cycle time: Reduced by 33% (0.65 s ← 0.97 s) compared with the existing model∗
    Acceleration/Deceleration: 10000 mm/s2(334% increase compared with the existing model)
    Max. speed: 700 mm/s (Improved by 40% compared with the existing model)
    ∗When LEY25GA-300 is operated from 0 to 300 mm (stroke)
  • Battery-less absolute encoder compatible
    Easy operation restart after recovery of the power supply
    Maintenance labor can be reduced as the product does not require the use of batteries.

Battery-less Absolute Encoder Type
Electric Actuator High Performance Slide Table/High Precision Type　LESYH□G Series

Updated Jun-22

  • Reduces cycle time
  • Cycle time: Reduced by 39% (0.37 s ← 0.61 s) compared with the existing model
  • Acceleration/Deceleration: 10000 mm/s2
    (200% increase compared with the existing model)
  • Max. speed: 800 mm/s (Improved by 200% compared with the existing model)
  • Battery-less absolute encoder type
    Restart from the last stop position is possible after recovery of the power supply.

Battery-less Absolute Encoder Type
Electric Actuator High Performance High Rigidity Guide Rod Type　LEG Series

Updated May-22

  • Max. weight of transferred object: 75 kg (Size 25), 100 kg (Size 32), 150 kg (Size 40)
  • High performance step motor controller
    (Max. acceleration/deceleration: 5000 mm/s2)
  • With internal battery-less absolute encoder
  • Auto switches are mountable. (In-line only)
    For checking the limit and the intermediate signal
  • Fully integrated the compact guide unit for improved lateral load capacity

Step Motor Controller　JXC Series

Updated Mar-22

  • A controller with STO sub-function has been added. [New]
  • Parallel I/O
  • Step motor (Servo/24 VDC)
  • Number of step data: 64 points

Battery-less Absolute Encoder Type
Electric Actuator/High Performance Slider Type　LEFS□G Series

Updated Mar-22

  • Reduces cycle time
    Cycle time: Reduced by 39% (0.57 s ← 0.93 s) compared with the existing model
    Acceleration/Deceleration: 10000 mm/s2 (334% increase compared with the existing model)
    Max. speed: 1500 mm/s (Improved by 25% compared with the existing model)
  • Battery-less absolute encoder compatible
    Easy operation restart after recovery of the power supply
    Maintenance labor can be reduced as the product does not require the use of batteries.

Electric Actuator
Slide Table/High Precision Type　LESYH Series

Updated Jul-21

  • Improved positioning repeatability due to the adoption of a ball screw drive.
    Positioning repeatability: ±0.01 mm
  • Lost motion: 0.1 mm or less
  • Increased vertical work load: 5 times or more
  • Motorless type
    Can be used with your current motor and driver !

Electric Actuator Battery-less Absolute Encoder Type　LEF□16E/LEY16E Series

Updated Jul-21

  • Restart from the last stop position is possible after recovery of the power supply.
  • Easy operation restart after recovery of the power supply
  • Does not require the use of batteries. Reduced maintenance
    Batteries are not required to store the position information. Therefore, there is no need to store spare batteries or to recycle and replace dead batteries.
  • Size 16 has been added. [New]
    Slider Type LEF, Rod Type LEY(G)

Electric Actuator Rod Type　LEY100 Series

Updated Jul-21

  • Max. force: 12000 N, Work load: 1200 kg, Max. stroke: 1000 mm
  • Can be mounted in accordance with ISO 15552
  • Modify the force/speed specifications
    (Change specifications by changing or removing the reducer)
  • Motorless type
  • An auto switch can be mounted

Dust-tight/Water-jet-proof (IP65 Equivalent/IP67 Equivalent) Battery-less Absolute Encoder Type Electric Actuator/Rod Type　LEY-X8 Series

Updated May-21

  • Enclosure: IP65＊ equivalent/IP67 equivalent
    ＊ Testing of IP65 has also been carried out.
  • Battery-less absolute encoder compatible

High Precision Type Electric Slide Table　LESYH-X171

Updated Jul-20

  • Size 25 has been added.[New]
  • Positioning repeatability
    ±0.01 mm due to the adoption of a ball screw drive
  • Lost motion: 0.1 mm or less
  • Increased vertical work load: 5 times or more
  • Battery-less absolute encoder compatible

Step Motor Controller with Input Signal to Perform Jog Operations　LECP1-XB182

Updated Apr-20

  • Jog operation can be performed using parallel input signals.
    Jog operation that could previously only be performed using the
    button on the front face can now be performed using the ON/OFF
    status of the input signal.
  • Application Examples
    Optimal for adjusting the feed value using a button operation while checking the motion of the actuator

Lock Release Unit/Electric Actuator With Lock For the LE□ Series　LE-ML-P-X117

Updated Mar-20

  • Lock release is only possible with 100 VAC power supply.
    Wiring is not required between the actuator and the controller.
    For 100 VAC power supply only

Dust-tight/Water-jet-proof (IP65 Equivalent/IP67 Equivalent) Electric Actuator/Rod Type　
LEY-X7 Series

Updated Jan-20

  • Enclosure: IP65 equivalent/IP67 equivalent
  • Max. stroke: 500 mm (For sizes 32 and 40)

Battery-less Absolute Encoder Type Electric Actuators　LE□ Series

Updated Mar-20

  • Restart from the last stop position is possible.
  • Easy operation restart after recovery of the power supply
    The position information is held by the encoder even when the power supply is turned off.
    A return to origin operation is not necessary when the power supply is recovered.
  • No battery is installed. Reduced maintenance
    No battery is used to store the position information.
    There is no need to manage spare batteries or replacement maintenance.

Electric Actuator/High Rigidity Slider Type Ball Screw Drive　LEJS100-X400

Updated Feb-20

  • Supports 750 W motor output
  • Work load (Speed: 500 mm/s, Lead: 10 mm)
    Horizontal: 400 kg, Vertical: 80 kg
  • Speed (Stroke: 500 mm, Lead: 50 mm)
    Horizontal/Vertical: 2300 (mm/s)
  • Max. acceleration/deceleration: 10000 mm/s2

AC Servo Motor Driver　LECSB-T/LECSC-T Series

Updated Dec-19

  • LECSB-T Series (Pulse Input Type/Positioning Type)
    Positioning by up to 255 point tables
    Input type: Pulse input (Sink (NPN) type interface)
  • LECSC-T Series (CC-Link direct input type)
    Position data/speed data setting and operation start/stop
    Positioning by up to 255 point tables (when 2 stations are occupied)
    Up to 32 drivers can be connected (when 2 stations are occupied) with CC-Link communication.

Built-in Intermediate Supports Electric Actuator/High Rigidity Slider Type Ball Screw Drive　LEJS63□-□M Series

Updated Oct-19

  • A maximum speed of 1,800 mm/s1 has been achieved
    throughout the entire stroke!
    The use of intermediate supports results in reduced
    deflection of the ball screw when a long stroke is used.
  • Max. stroke: 1,790 mm
  • Horizontal work load: 85 kg (For the 10 mm lead)
  • Positioning repeatability: ±0.01 mm (High-precision type)

Go Top