SMC- Separate Controller Bar TypeIonizer Series IZT40/41/42/43

Static Neutralization Equipment » Separate Controller Bar TypeIonizer Series IZT40/41/42/43 - Specifications/Dimensions

|Specifications

Ionizer model		IZT40	IZT41(-L) (NPN specification)	IZT41P(-L) (PNP specification)	IZT42(-L) (NPN specification)	IZT42(-L) (PNP specification)
Ion generation method		Corona discharge type
Method of applying voltage		AC、DC^{Note 1)}	AC、DC^{Note 1)}		Dual AC
Applied voltage		±7,000V			±6,000V
Offset voltage Note 2)		Within ±30V
Air purge	Fluid	Air (Clean dry air)
	Operating pressure	0.5 MPa or less
	Proof pressure	0.7MPa
	Connecting tube size (One side can be plugged)	Metric size：ø4, ø6, ø8, ø10 Inch size：ø3/16", ø1/4", ø5/16", ø3/8"
Current consumption		0.7 A or less (+0.6 A or less per ionizer when connected)	0.8 A or less (+0.7 A or less per ionizer when connected)		1.4 A or less (+1.3 A or less per ionizer when connected)
Power supply voltage		24 VDC ±10% (100 to 240 VAC: AC adapter option: Applicable when only one bar is used)
Input signal Note 3)	Ion generation stop signal	―	Connected to DC (−) Voltage range: 5 VDC or less Current consumption: 5 mA or less	Connected to DC (+) Voltage range: 19 VDC to power supply voltage Current consumption: 5 mA or less	Connected to DC (−) Voltage range: 5 VDC or less Current consumption: 5 mA or less	Connected to DC (+) Voltage range: 19 VDC to power supply voltage Current consumption: 5 mA or less
Input signal Note 3)		―
Output signal Note 3)	Maintenance detection signal	―	Max. load current: 100 mA Residual voltage: 1 V or less (Load current at 100 mA) Max. applied voltage: 26.4 VDC	Max. load current: 100 mA Residual voltage: 1 V or less (Load current at 100 mA)	Max. load current: 100 mA Residual voltage: 1 V or less (Load current at 100 mA) Max. applied voltage: 26.4 VDC	Max. load current: 100 mA Residual voltage: 1 V or less Error signal (Load current at 100 mA)
Output signal Note 3)	Error signal	―
IO-Link device^{Note 4)}		―	Voltage range: 18 to 30 VDC Current consumption: 100 mA or less ∗ For details, refer to the “IO-Link Communication Specifications” table below
Function		High-voltage abnormality detection (Ion generation stops when abnormality is detected)	Auto balance, maintenance detection, high-voltage abnormality detection (Ion generation stops when abnormality is detected), and ion generation stop input
Effective static neutralization distance		50 to 2000 mm
Ambient and fluid temperatures	Controller,High-voltage power supply module	0 to 40°C
Ambient and fluid temperatures	Bar	0 to 50°C
Ambient humidity		35 to 80%Rh (No condensation)
Material	Controller	Cover: ABS, Aluminum, Switch: Silicone rubber^{Note 3)}
	High-voltage power supply module	Cover: ABS, Aluminum
	Bar	Cover: ABS, Emitter cartridge: PBT, Emitter: Tungsten or Single crystal silicon, High-voltage cable: Silicone rubber, PVC
Standards		CE (EMC Directive)

Note 1) Apply cathode or anode to DC
Note 2) When the air purge is performed between a charged object and an ionizer at a distance of 300 mm
Note 3) For transistor input/output specification products
Note 4) For IO-Link compatible products

Ionizer model		IZT43(-L)(NPN)	IZT43(-L)(PNP)
Ion generation method		Corona discharge type
Method of applying voltage		AC,DC^{Note 1)}
Applied voltage		±6,000V
Offset voltage^{Note 2)}		Within ±30V
Air purge	Fluid	Air (Clean dry air)
	Operating pressure	0.7MPa or less
	Connecting tube size(One side can be plugged)	Metric size：φ6 Inch size：ø1/4"
Current consumption		0.4A or less （＋0.4A or less per ionizer when connected）
Power supply voltage		DC24V±10％（100 to 240VAC：AC adapter option: Applicable when only one nozzle is used）
Input signal Note 3)	Ion generation stop signal	Connected to DC (−) Voltage range: 5 VDC or less Current consumption: 5 mA or less	Connected to DC (+) Voltage range: 19 VDC to power supply voltage Current consumption: 5 mA or less
Output signal Note 3)	Maintenance detection signal	Max. load current: 100 mA Residual voltage: 1 V or less(Load current at 100 mA) Max. applied voltage: 26.4 VDC	Max. load current: 100 mA Residual voltage: 1 V or less(Load current at 100 mA)
Output signal Note 3)	Error signal
IO-Link device^{Note 4)}		Voltage range: 18 to 30 VDC Current consumption: 100 mA or less ∗ For details, refer to the “IO-Link Communication Specifications” table below
Function		Auto balance, maintenance detection, high-voltage abnormality detection (Ion generation stops when abnormality is detected), and ion generation stop input
Effective static neutralization distance		50 to 2000mm
Ambient and fluid temperatures	Controller High-voltage power supply module Nozzle	0 to 40℃
Ambient humidity		35 to 65％Rh（No condensation）
Material	Controller	Cover: ABS, Aluminum, Switch: Silicone rubber Note 3)
	High-voltage power supply module	Cover: ABS, Aluminum
	Nozzle	Housing：PBT,Stainless steel　Emitter cartridge：PBT,　Emitter：Tungsten High voltage cable：Silicone rubber,PVC,Stainless steel
Standards/Directive		CE（EMC Directive）

Note 1）Apply cathode or anode to DC
Note 2）When the air purge is performed between a charged object and an ionizer at a distance of 300 mm
Note 3) For transistor input/output specification products
Note 4) For IO-Link compatible products

IO-Link Communication Specifications

IO-Link type	Device
IO-Link version	V1.1
Configuration file format	IODD file^Note)
Communication speed	COM2（38.4kbps）
Min. cycle time	8.0ms
Process data length	Input Data：13byte、Output Data：9byte
On request data communication	Yes
Data storage function	Yes
Event function	Yes
Vendor ID	131（0×0083）
Device ID	581（0×000245）

Note）The configuration file can be downloaded from the SMC website: https://www.smcworld.com

Weight [g]

	Controller	High-voltage power supply module
IZT40	210	800
IZT41	210	800
IZT42	210	1350
IZT43	210	680

Nozzle Weight [g]

Nozzle
IZT43	High voltage cable(1ｍ)	200
	High voltage cable(2ｍ)	310
	High voltage cable(3ｍ)	440

Number of Emitter Cartridges/Bar Weight

Bar length symbol		16	22	34	40	46	58	64	82	112	130	160	190	232	250
Number of emitter cartridges		2	3	5	6	7	9	10	13	18	21	26	31	38	41
IZT40 IZT41 (Common for bars)	High-voltage cable (1m)	360	420	530	590	650	760	820	990	1270	1440	1720	2010	2410	2580
	High-voltage cable (2m)	490	550	660	720	780	890	950	1120	1400	1570	1850	2140	2540	2710
	High-voltage cable (3m)	610	670	780	840	900	1010	1070	1240	1520	1690	1970	2260	2660	2830
IZT42	High-voltage cable (1m)	520	580	690	750	810	920	980	1150	1430	1600	1880	2170	2570	2740
	High-voltage cable (2m)	770	830	940	1000	1060	1170	1230	1400	1680	1850	2130	2420	2820	2990
	High-voltage cable (3m)	1010	1070	1180	1240	1300	1410	1470	1640	1920	2090	2370	2660	3060	3230

AC Adapter (Sold separately)

Model	IZT40-CG1, IZT40-CG2
Input voltage	100 to 240 VAC, 50/60 Hz
Output current	1.9A
Ambient temperature	0 to 40℃
Ambient humidity	35 to 65%Rh (No condensation)
Weight	375g
Standards/Directive	CE, _cUL

Static Neutralization Equipment

|Specifications

|Dimensions

Ionizer / IZT40,IZT41

Ionizer / IZT42

Ionizer / IZT43