Pneumatic Equipment for Food Industry ⁄ Industry
Caser robot Heat Resistant
Products Category
Made to Order
Heat Resistant Cylinder (–10 to 150°C): -XB6
Seal material and grease have been changed, so that it could be used even at higher temperature up to 150
from –10°C.
Specifications
| Ambient temperature range | –10°C to 150°C (CS1, CS2: 0°C to 150°C) |
| Seal material | Fluororubber |
| Grease | Heat resistant grease |
| Specifications other than above and external dimensions |
Same as standard type |
CY3B Series
Specifications
| Applicable size | CY3B |
| Bore size | ø6 to ø63 |
| Ambient and fluid temperature | 50 to 150°C※1 |
| Maximum operating pressure | 0.5 MPa |
| Piston speed | 50 to 400 mm/s※1 |
※1: When using in less than 100°C range, since it could make a difference in the maintenance cycle, depending on the operating speed, se it at 200 mm/s or less.
- 1. When using with the operating temperature from 60 up to 100°C, and the piston speed of more than 200 mm/s, please consult with SMC separately.
- 2. When using with the operating temperature from 50 up to 100°C, and the piston speed of 200 mm/s or less, XB6 specifications can be used.
- 3. As for XB6, regarding the temperature range (over 50 to 60°C) which overlaps the one of standard products, consider the tendency of operating temperature (upper, lower limits), then choose a model.
Cylinder with Heat Resistant Auto Switch
(Max. 150°C): -XB14
Heat resistant compact cylinder which can mount heat resistant solid state switch (D-M9□J)
Specifications
| Applicable cylinde | Compact cylinder/Standard type |
| Series | CQ2 |
| Bore size [mm] | 16, 20, 25, 32, 40, 50, 63 |
| Type | Non-lube |
| Fluid | Air |
| Proof pressure | 1.5 MPa |
| Maximum operating pressure | 1.0 MPa |
| Minimum operating pressure | 0.05 MPa (For ø16 only, 0.07 MPa) |
| Ambient and fluid temperature | 0 to 150°C |
| Rubber bumper | None |
| Rod end thread | Male or female thread |
| Stroke length tolerance | +1.0(～0)mm |
| Piston speed | 50 to 500 mm/s |
Heat Resistant Air Gripper (–10 to 100°C): -X4
Seal material and grease have been changed, so that it could be used even at higher temperature up to 100 from –10°C.
Specifications
| Ambient temperature range | –10°C to 100°C |
| Seal material | Fluororubber |
| Grease | Heat resistant grease (GR-F) |
| Specifications other than above and external dimensions |
Same as standard type |
＜Applicable Series＞
CJP2/CJ2-Z/CM2-Z/CG1-Z/MB-Z/MB1-Z/CA2-Z/
CUJ/CU/CQS/CG5/CS1/CS2/CQ2/MGP/MGP-Z/
MGQ/MGG/MGC/CXSJ/CXS/MK Series
When using with the operating temperature fluctuated between 50°C or less and 100°C or more, the operating speed, etc. will be largely restricted by the durability. Prior to use, please contact SMC.
＜Applicable Series＞
MHC/MHF/MHK/MHL/MHS/MHT/MHW/MHY/
MHZ Series
Heat Resistant Cylinder with Auto Switch
MGP20 to 63 Series
- The heat resistant solid state auto switch (D-F7NJL) can be mounted on the MGPM20/25/32/50/63.
Heat Resistant Auto Switch
D-A73HM-536
- Can be used in an atmosphere of 130°C.
Cannot be mounted on standard cylinders.
Please contact SMC for applicable cylinders.
