FAQ

|Air Cylinders

I would like to check the following about the MY series rodless cylinder stroke adjustment unit.
① Can the stroke adjustment unit be retrofitted to the cylinder?
② What are the part numbers of the stroke adjustment unit and the shock absorbers for L and H units?
③ What is the stroke adjustment unit symbol?

① The stroke adjustment unit can be retrofitted to MY□ series cylinders. (The stroke adjustment unit is not applicable to bore sizes ø50 to ø100 of the MY3A series nor the MY1B series.)
② The stroke adjustment unit comes in a number of variations: an A unit, an L unit, and an H unit. In addition, no spacer, a short spacer, or a long spacer can be selected. The part number of the single unit indicates the type to be used on the left side and the type to be used on the right side. The part numbers of the stroke adjustment unit variations are shown in the “Options” section in the catalog of each MY series. Also, refer to the MY series catalog for a summary of this information.
③ The stroke adjustment unit is a combination of either an A unit, an L unit, or an H unit (symbol “A,” “L,” or “H”) and no spacer, a short spacer (symbol “6”), or a long spacer (symbol “7”), 1 for the left side and 1 for the right.
Please refer to the MY series catalog.
The MY series catalog can be found here.