FAQ

|Electric Actuators

Is there a way to manually operate moving parts such as an actuator table when a controller is not connected?

For an actuator with a small lead, it is difficult to move a moving part such as a table with external force. In this case, insert a flathead screwdriver into the manual override screw on the motor part and turn it to operate it.
If the actuator is the type with a lock, connect the lock cable to the controller, apply 24 VDC to the “Unlock/BK-RLS” terminal, lock, and then perform the operation. If the lock is released with the actuator in the vertical direction, the moving part may fall under its own weight.
Perform unlocking only after ensuring sufficient safety. If the actuator is moved by hand with a controller connected, the induced voltage of the motor may affect the controller. When moving by hand, do not connect the actuator cable to the controller’s CN2 (motor connector).