FAQ

|Electric Actuators

Can an actuator be instructed to move backward while in the process of moving forward using an LECA6/LECP6 series controller?

Switching to an alternate operation is possible. It can be switched by issuing an operation instruction to move backward while in the process of moving forward. Keep in mind that if the actuator cannot decelerate in time to perform the instructed operation, an alarm will be generated. In this case, review the operation data.

Example: Positioning operation, operation method ABS, step no. 1 = 50 mm, step no. 2 = 0 mm
The actuator moves forward by instructing step no. 1 to operate, and if step no. 2 is instructed to operate before completion, it will retract and stop at the position of 0 mm.