FAQ

|Static Neutralization Equipment

What are the possible causes of an IZS40/41/42 series ionizer ION/HV LED turning ON (red) after operation has stopped, and what can be done to remedy this?

The ION/HV LED on the front panel turns ON (green) during normal discharge.
When the LED is ON (red), this indicates a high-voltage error has occurred.
The main cause of this is usually foreign matter or water droplets adhering to the emitter (electrode needle).
Remove the cartridge and clean the emitter after stopping the power supply and air supply.
For details on how to clean the emitter, refer to “Maintenance: Cleaning procedure of the emitter” in the IZS4□operation manual, which can be found here. In order to clear the alarm, remedy the cause of the error, and then turn the power ON again.
It is recommended that the cartridge be replaced if the error occurs again even after cleaning the electrode.